# HF: Hartree–Fock Theory¶

*Code author: Justin M. Turney, Robert M. Parrish, and Andrew C. Simmonett*

*Section author: Robert M. Parrish and Jerome F. Gonthier*

*Module:* Keywords, PSI Variables, LIBSCF_SOLVER, LIBMINTS, LIBFOCK, LIBDIIS

## Introduction¶

Self-Consistent-Field (SCF) theory forms the cornerstone of *ab initio* quantum
chemistry. Here SCF refers both to conventional Hartree–Fock (HF) molecular
orbital theory and also to generalized Kohn–Sham Density Functional Theory
(KS-DFT). PSI4 contains a wholly rewritten SCF code, including many of the
most popular spin specializations, several efficient numerical methods for
treating Fock Matrix construction, and a brand new KS-DFT code featuring many of
the most popular DFT functional technologies.

An illustrative example of using the SCF module is as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 | ```
molecule {
0 3
O
O 1 1.21
}
set {
basis cc-pvdz
guess sad
reference uhf
scf_type direct
}
energy('scf')
``` |

This will run a UHF computation for triplet molecular oxygen (the ground state) using a Direct algorithm for the Electron Repulsion Integrals (ERI) and starting from a Superposition of Atomic Densities (SAD) guess. DF integrals are automatically used to converge the DF-SCF solution before the Direct algorithm is activated. After printing all manner of titles, geometries, sizings, and algorithm choices, the SCF finally reaches the iterations:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 | ```
Total Energy Delta E RMS |[F,P]|
@DF-UHF iter 0: -149.80032977420572 -1.49800e+02 1.48808e-01
@DF-UHF iter 1: -149.59496320631871 2.05367e-01 2.58009e-02
@DF-UHF iter 2: -149.62349901753706 -2.85358e-02 6.68980e-03 DIIS
@DF-UHF iter 3: -149.62639942687878 -2.90041e-03 2.19285e-03 DIIS
@DF-UHF iter 4: -149.62689561367233 -4.96187e-04 5.99497e-04 DIIS
@DF-UHF iter 5: -149.62694151275420 -4.58991e-05 1.27338e-04 DIIS
@DF-UHF iter 6: -149.62694337910040 -1.86635e-06 1.65616e-05 DIIS
@DF-UHF iter 7: -149.62694340915198 -3.00516e-08 2.68990e-06 DIIS
@DF-UHF iter 8: -149.62694340999315 -8.41169e-10 2.61249e-07 DIIS
DF guess converged.
...
@UHF iter 9: -149.62730705472407 -3.63645e-04 8.63697e-05 DIIS
@UHF iter 10: -149.62730737348096 -3.18757e-07 1.50223e-05 DIIS
@UHF iter 11: -149.62730738537113 -1.18902e-08 3.80466e-06 DIIS
@UHF iter 12: -149.62730738624032 -8.69193e-10 7.06634e-07 DIIS
``` |

The first set of iterations are from the DF portion of the computation, the second set uses the exact (but much slower) Direct algorithm. Within the DF portion of the computation, the zeroth-iteration uses a non-idempotent density matrix obtained from the SAD guess, so the energy is unphysically low. However, the first true iteration is quite close to the final DF energy, highlighting the efficiency of the SAD guess. Pulay’s DIIS procedure is then used to accelerate SCF convergence, with the DF phase reaching convergence in eight true iterations. When used together, SAD and DIIS are usually sufficient to converge the SCF for all but the most difficult systems. Additional convergence techniques are available for more difficult cases, and are detailed below. At this point, the code switches on the requested Direct integrals technology, which requires only four full iterations to reach convergence, starting from the DF guess. This hybrid DF/Direct procedure can significantly accelerate SCF computations requiring exact integrals.

After the iterations are completed, a number of one-electron properties are printed, and some bookkeeping is performed to set up possible correlated computations. Additional one-electron properties are available by increasing the PRINT option. Also printed are the occupied and virtual orbital energies, which are useful in elucidating the stability and reactivity of the system.

## Theory¶

The objective of Hartree–Fock (HF) Theory is to produce the optimized Molecular Orbitals (MOs) \(\{\psi_i\}\),

Here, \(\{\phi_{\mu}\}\) are the basis functions, which, in PSI4 are contracted Cartesian Gaussian functions often referred to as Atomic Orbitals (AOs). The matrix \(C_{\mu i}\) contains the MO coefficients, which are the constrained variational parameters in Hartree–Fock. The molecular orbitals are used to build the simplest possible antisymmetric wavefunction, a single Slater determinant,

This form for the Hartree–Fock wavefunction is actually entirely equivalent to treating the electron correlation as a mean field repulsion in \(\mathbb{R}^6\) instead of a more complicated effect in \(\mathbb{R}^N\).

Considering the electronic Hamiltonian,

the Hartree–Fock energy is, by Slater’s rules,

Here \(H\) is the AO-basis one-electron potential, encapsulating both electron-nuclear attraction and kinetic energy,

\(D\) is the AO-basis density matrix, build from the occupied orbital coefficients,

and \(F\) is the Fock matrix, which is the effective one-body potential at the current value of the density,

Here the tensor \((\mu\nu|\lambda\sigma)\) is an AO Electron-Repulsion Integral (ERI) in chemists’ notation,

The MO coefficients are found as the generalized eigenvectors of the Fock Matrix,

The eigenvalues \(\epsilon\) are the orbital energies, and the metric matrix \(S\) is the AO-basis overlap matrix

Note that the Fock Matrix depends on the density (both alpha and beta), and therefore the orbitals. Because of this, SCF is a nonlinear procedure, which terminates when the generating orbitals are self-consistent with the Fock matrix they generate.

The formation of the Coulomb matrix \(J\) and the exchange matrix \(K^{\alpha}\) dominate the computational effort of the SCF procedure. For very large systems, diagonalization of the Fock matrix can also present a significant hurdle.

## Minimal Input¶

Minimal input for a Hartree–Fock computation is a molecule block, basis set
option, and a call to `energy('scf')`

:

1 2 3 4 5 6 7 | ```
molecule {
He
}
set basis sto-3g
energy('scf')
``` |

This will run a Restricted Hartree–Fock (RHF) on neutral singlet Helium in
\(D_{2h}\) spatial symmetry with a minimal `STO-3G`

basis, 1.0E-6
energy and density convergence criteria (since single-point, see
SCF Convergence & Algorithm), a DF ERI algorithm, symmetric
orthogonalization, DIIS, and a core Hamiltonian guess. For more
information on any of these options, see the relevant section below.

## Spin/Symmetry Treatment¶

PSI4 implements the most popular spin specializations of Hartree–Fock theory, including:

- Restricted Hartree–Fock (RHF) [Default]
- Appropriate only for closed-shell singlet systems, but twice as efficient as the other flavors, as the alpha and beta densities are constrained to be identical.
- Unrestricted Hartree–Fock (UHF)
- Appropriate for most open-shell systems and fairly easy to converge. The spatial parts of the alpha and beta orbitals are fully independent of each other, which allows a considerable amount of flexibility in the wavefunction. However, this flexibility comes at the cost of spin symmetry; UHF wavefunctions need not be eigenfunctions of the \(\hat S^2\) operator. The deviation of this operator from its expectation value is printed on the output file. If the deviation is greater than a few hundredths, it is advisable to switch to a ROHF to avoid this “spin-contamination” problem.
- Restricted Open-Shell Hartree–Fock (ROHF)
- Appropriate for open-shell systems where spin-contamination is problem. Sometimes more difficult to converge, and assumes uniformly positive spin polarization (the alpha and beta doubly-occupied orbitals are identical).
- Constrained Unrestricted Hartree–Fock (CUHF)
- A variant of ROHF that starts from a UHF ansatz and is therefore often easier to converge.

These can be invoked by the REFERENCE keyword, which defaults to `RHF`

.
The charge and multiplicity may either be specified in the molecule definition:

1 2 3 4 | ```
molecule h {
0 2 # Neutral doublet
H
}
``` |

or, dynamically, by setting the relevant attributes in the Python molecule object:

1 2 | ```
h.set_molecular_charge(0)
h.set_multiplicity(2)
``` |

Abelian spatial symmetry is fully supported in PSI4 and can be used to obtain physical interpretation of the molecular orbitals, to assist in difficult convergence cases, and, in some methods, to obtain significant performance gains. The point group of the molecule is inferred when reading the molecule section, and may be overridden by the symmetry flag, as in:

1 2 3 4 5 | ```
molecule h {
0 2
H
symmetry c1
}
``` |

or by the `reset_point_group`

Python molecule attribute:

1 | ```
h.reset_point_group('c2v')
``` |

During the SCF procedure, the occupation of orbitals is typically determined by
the Aufbau principal across all spatial symmetries. This may result in the
occupation shifting between iterations. If the occupations are known *a priori*,
they may be clamped throughout the procedure by using the DOCC and
SOCC options. For instance, all good quantum chemists know that
\(C_{2v}\) water is
actually,:

1 2 3 4 5 6 7 8 9 10 11 12 13 | ```
molecule h2o {
0 1
O
H 1 1.0
H 1 1.0 2 104.5
}
set {
docc [3, 0, 1, 1] # 1A1 2A1 1B1 3A1 1B2
basis cc-pvdz
}
energy('scf')
``` |

## Broken Symmetry¶

For certain problems, such diradicals, allowing the spin-up and spin-down orbitals to differ in closed-shell computations can be advantageous; this is known as symmetry breaking. The resulting unrestricted wavefunction will often provide superior energetics, due to the increased flexibility, but it will suffer non-physical spin contamination from higher multiplicity states. A convenient approach to break symmetry is to perform a UHF or UKS calculation with the guess HOMO and LUMO orbitals mixed. Mixing of the guess orbitals can be requested by setting the GUESS_MIX keyword to true:

1 2 3 | ```
set reference uhf
set guess_mix true
energy('scf')
``` |

## Orthogonalization¶

One of the first steps in the SCF procedure is the determination of an
orthogonal basis (known as the OSO basis) from the atomic orbital basis (known
as the AO basis). The Molecular Orbital basis (MO basis) is then built as a
particular unitary transformation of the OSO basis. In PSI4, the
determination of the OSO basis is accomplished via either symmetric or canonical
orthogonalization. Symmetric orthogonalization uses the symmetric inverse square
root of the overlap matrix for the orthogonalization matrix. Use of symmetric
orthogonalization always yields the same number of OSO functions (and thereby
MOs) as AO functions. However, this may lead to numerical problems if the
overlap matrix has small eigenvalues, which may occur for large systems or for
systems where diffuse basis sets are used. This problem may be avoided by using
canonical orthogonalization, in which an asymmetric inverse square root of the
overlap matrix is formed, with numerical stability enhanced by the elimination
of eigenvectors corresponding to very small eigenvalues. As a few combinations
of AO basis functions may be discarded, the number of canonical-orthogonalized
OSOs and MOs may be slightly smaller than the number of AOs. In PSI4,
symmetric orthogonalization is used by default, unless the smallest overlap
eigenvalue falls below the user-supplied double option S_TOLERANCE, which
defaults to 1E-7. If the smallest eigenvalue is below this cutoff, canonical
orthogonalization is forced, and all eigenvectors corresponding to eigenvalues
below the cutoff are eliminated. Use of canonical orthogonalization can be
forced by setting the S_ORTHOGONALIZATION option to `CANONICAL`

. Note
that in practice, the MOs and OSOs are built separately within each irrep from
the symmetry-adapted combinations of AOs known as Unique Symmetry Orbitals
(USOs). For canonical orthogonalization, this implies that the number of MOs
and OSOs per irrep may be slightly smaller than the number of USOs per irrep.

A contrived example demonstrating OSOs/MOs vs. AOs with symmetry is shown below:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 | ```
molecule h2o {
0 1
O
H 1 1.0
H 1 1.0 2 104.5
symmetry c2 # Two irreps is easier to comprehend
}
set {
s_tolerance 0.0001 # Set an unreasonably tight
# tolerance to force canonical
basis aug-cc-pv5z # This diffuse basis will have
# small-ish eigenvalues for even H2O
print 3
}
energy('scf')
``` |

Output:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 | ```
==> Pre-Iterations <==
-------------------------------------------------------
Irrep Nso Nmo Nalpha Nbeta Ndocc Nsocc
-------------------------------------------------------
A 145 145 0 0 0 0
B 142 142 0 0 0 0
-------------------------------------------------------
Total 287 287 5 5 5 0
-------------------------------------------------------
...
Minimum eigenvalue in the overlap matrix is 1.6888063568E-05.
Using Canonical Orthogonalization with cutoff of 1.0000000000E-04.
Irrep 0, 1 of 145 possible MOs eliminated.
Irrep 1, 2 of 142 possible MOs eliminated.
Overall, 3 of 287 possible MOs eliminated.
``` |

In this example, there are 287 AO basis functions after spherical harmonics are applied. These are used to produce 287 symmetry adapted USOs, 145 of which are assigned to irrep A, and 142 of which are assigned to irrep B. Within irrep A, 144 OSOs fall above the eigenvalue cutoff, and within irrep B 140 OSOs fall above the eigenvalue cutoff. In total, 284 molecular orbitals are chosen from 287 AOs/USOs.

## Initial Guess¶

In each step of the SCF procedure, a new Fock or Kohn–Sham potential is built according to the previous density, following which the potential is diagonalized to produce new molecular orbitals, from which a new density is computed. This procedure is continued until either convergence is reached or a preset maximum number of iterations is exceeded. Convergence is determined by both change in energy and root-mean-square change in density matrix values, which must be below the user-specified E_CONVERGENCE and D_CONVERGENCE, respectively. The maximum number of iterations is specified by the MAXITER option. It should be noted that SCF is a chaotic process, and, as such, often requires careful selection of initial orbitals and damping during iterations to ensure convergence. This is particularly likely for large systems, metallic systems, multireference systems, open-shell systems, anions, and systems with diffuse basis sets.

For initial orbital selection, several options are available. These include:

- CORE
- Diagonalization of the core Hamiltonian, removing even mean-field electron repulsion. Simple, but often too far from the final solution for larger systems. READ becomes the default for the second and later iterations of geometry optimizations.
- SAD [Default]
- Superposition of Atomic Densities. Builds the initial density as the
spin-averaged sum of atomic UHF computations in the current basis. If an
open-shell system, uniform scaling of the spin-averaged density matrices is
performed. If orbitals are needed (
*e.g.*, in density fitting), a partial Cholesky factorization of the density matrices is used. Often extremely accurate, particularly for closed-shell systems. - GWH [Default]
- Generalized Wolfsberg-Helmholtz, a simple Hückel-Theory-like method based on the overlap and core Hamiltonian matrices. May be useful in open-shell systems.
- READ
- Read the previous orbitals from a checkpoint file, casting from one basis to another if needed. Useful for starting anion computations from neutral orbitals, or after small geometry changes. At present, casting from a different molecular point group is not supported. This becomes the default for the second and later iterations of geometry optimizations.

These are all set by the GUESS keyword. Also, an automatic Python procedure has been developed for converging the SCF in a small basis, and then casting up to the true basis. This can be done by adding BASIS_GUESS = SMALL_BASIS to the options list. We recommend the 3-21G basis for the small basis due to its efficient mix of flexibility and compactness. An example of performing an RHF solution of water by SAD guessing in a 3-21G basis and then casting up to cc-pVTZ is shown below:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 | ```
molecule h2o {
0 1
O
H 1 1.0
H 1 1.0 2 104.5
}
set {
basis cc-pvtz
basis_guess 3-21G
guess sad
}
energy('scf')
``` |

## Convergence Stabilization¶

With regard to convergence stabilization, Pulay’s Direct Inversion of the Iterative Subspace (DIIS) extrapolation, Gill’s Maximum Overlap Method (MOM), and damping are all implemented. A summary of each is presented below,

- DIIS [On by Default]
- DIIS uses previous iterates of the Fock Matrix together with an error criterion based on the orbital gradient to produce an informed estimate of the next Fock Matrix. DIIS is almost always necessary to converge the SCF procedure and is therefore turned on by default. In rare cases, the DIIS algorithm may need to be modified or turned off altogether, which may be accomplished via options.
- MOM [Off by Default]
- MOM was developed to combat a particular class of convergence failure:
occupation flipping. In some cases, midway though the SCF procedure, a partially
converged orbital which should be occupied in the fully-optimized SCF solution
has a slightly higher orbital eigenvalue than some other orbital which should be
destined to be a virtual orbital. This results in the virtual orbital being
spuriously occupied for one or more iterations. Sometimes this resolves itself
without help, other times the occupation flips back and forth between two, four,
or more orbitals. This is typically visible in the output as a non-converging
SCF which eventually settles down to steady oscillation between two (or more)
different total energies. This behavior can be ameliorated by choosing occupied
orbitals by “shape” instead of by orbital eigenvalue,
*i.e.*, by choosing the set of new orbitals which looks most like some previously known “good” set. The “good” set is typically the occupied orbitals from one of the oscillating iterations with the lowest total energy. For an oscillating system where the lowest total energy occurs on iterations \(N,N+2,\ldots\), invoking MOM_START`N`

can often rescue the convergence of the SCF. MOM can be used in concert with DIIS, though care should be taken to not turn MOM on until the oscillatory behavior begins. - Damping [Off by Default]
- In some cases, a static mixing of Fock Matrices from adjacent iterations can quench oscillations. This mixing, known as “damping” can be activated by setting the DAMPING_PERCENTAGE keyword to a nonzero percent.
- SOSCF [Off by Default]
- See Second-order Convergence

## ERI Algorithms¶

The key difficulty in the SCF procedure is treatment of the four-index ERI contributions to the Fock Matrix. A number of algorithms are available in PSI4 for these terms. The algorithm is selected by the SCF_TYPE keyword, which may be one of the following

- PK [Default]
- An out-of-core, presorted algorithm using exact ERIs. Quite fast for a zero-error algorithm if enough memory is available. Integrals are generated only once, and symmetry is utilized to reduce number of integrals.
- OUT_OF_CORE
- An out-of-core, unsorted algorithm using exact ERIs. Overcomes the memory bottleneck of the current PK algorithm. Integrals are generated only once, and symmetry is utilized to reduce number of integrals.
- DIRECT
- A threaded, sieved, integral-direct algorithm, with full permutational symmetry. This algorithm is brand new, but seems to be reasonably fast up to 1500 basis functions, uses zero disk (if DF pre-iterations are turned off), and can obtain significant speedups with negligible error loss if INTS_TOLERANCE is set to 1.0E-8 or so.
- DF [Default]
- A density-fitted algorithm designed for computations with thousands of
basis functions. This algorithm is highly optimized, and is threaded
with a mixture of parallel BLAS and OpenMP. Note that this algorithm
should use the -JKFIT series of auxiliary bases,
*not*the -RI or -MP2FIT bases. The default guess for auxiliary basis set should work for most bases, otherwise the DF_BASIS_SCF keyword can be used to manually specify the auxiliary basis. This algorithm is preferred unless either absolute accuracy is required [\(\gtrsim\)CCSD(T)] or a -JKFIT auxiliary basis is unavailable for the orbital basis/atoms involved. - CD
- A threaded algorithm using approximate ERIs obtained by Cholesky decomposition of the ERI tensor. The accuracy of the Cholesky decomposition is controlled by the keyword CHOLESKY_TOLERANCE. This algorithm is similar to the DF algorithm, but it is not suitable for gradient computations. The algorithm to obtain the Cholesky vectors is not designed for computations with thousands of basis functions.

In some cases the above algorithms have multiple implementations that return the same result, but are optimal under different molecules sizes and hardware configurations. Psi4 will automatically detect the correct algorithm to run and only expert users should manually select the below implementations. The DF algorithm has the following two implementations

- MEM_DF
- A DF algorithm optimized around memory layout and is optimal as long as there is sufficient memory to hold the three-index DF tensors in memory. This algorithm may be faster for builds that require disk if SSDs are used.
- DISK_DF
- A DF algorithm (the default DF algorithm before Psi4 1.2) optimized to minimize Disk IO by sacrificing some performance due to memory layout.

Note that these algorithms have both in-memory and on-disk options, but performance penalties up to a factor of 2.5 can be found if the incorrect algorithm is chosen. It is therefore highly recommended that the keyword “DF” be selected in all cases so that the correct implementation can be selected by PSI4’s internal routines. Expert users can manually switch between MEM_DF and DISK_DF; however, they may find documented exceptions during use as several post SCF algorithms require a specific implementation.

For some of these algorithms, Schwarz and/or density sieving can be used to identify negligible integral contributions in extended systems. To activate sieving, set the INTS_TOLERANCE keyword to your desired cutoff (1.0E-12 is recommended for most applications).

We have added the automatic capability to use the extremely fast DF
code for intermediate convergence of the orbitals, for SCF_TYPE
`DIRECT`

. At the moment, the code defaults to cc-pVDZ-JKFIT as the
auxiliary basis, unless the user specifies DF_BASIS_SCF manually. For
some atoms, cc-pVDZ-JKFIT is not defined, so a very large fitting basis of last
resort will be used.
To avoid this, either set DF_BASIS_SCF to an auxiliary
basis set defined for all atoms in the system, or set DF_SCF_GUESS
to false, which disables this acceleration entirely.

## Second-order Convergence¶

Second-order convergence takes into account both the gradient and Hessian to take a full Newton step with respect to the orbital parameters. This results in quadratic convergence with respect to density for SCF methods. For cases where normal acceleration methods either fail or take many iterations to converge, second-order can reduce the total time to solution.

Solving second-order (SO) methods exactly would require an inversion of the orbital Hessian (an expensive \(\mathbb{N}^6\) operation); however, these equations are normally solved iteratively where each iteration costs the same as a normal Fock build (\(\mathbb{N}^4\)). The overall SOSCF operation is thus broken down into micro- and macroiterations where the microiterations refer to solving the SOSCF equations and macroiterations are the construction of a new Fock matrix based on the orbitals from a SOSCF step.

SOSCF requires that all elements of the gradient to be less than one before the
method is valid. To this end, pre-SOSCF SCF iterations use normal
gradient-based extrapolation procedures (*e.g.*, DIIS) until the gradient
conditions are met. Note that while the total number of macroiterations will be
less for SOSCF than gradient-based convergence acceleration, the cost of solving
the microiterations typically results in the overall cost being greater for
SOSCF than for gradient-based methods. Therefore, SOSCF should only be used if
it is difficult to locate a stable minimum.

SOSCF is available for all HF and DFT references with the exception of meta-
GGA functionals. To enable, set the option SOSCF to `true`

.
Additional options to modify the number of microiterations taken are as
follows:

SOSCF_START_CONVERGENCE: when to start SOSCF based on the current density RMS

SOSCF_MAX_ITER: the maximum number of SOSCF microiterations per macroiteration

SOSCF_CONV: the relative convergence tolerance of the SOSCF microiterations

SOSCF_PRINT: option to print the microiterations or not

## Stability Analysis¶

SCF algorithms attempt to minimize the gradient of the energy with respect to orbital variation parameters. At convergence, the gradient should be approximately zero given a convergence criterion. Although this is enough to make sure the SCF converged to a stationary point, this is not a sufficient condition for a minimal SCF solution. It may be a saddle point or a maximum.

To ensure that a minimum has been found, the electronic Hessian, *i.e.* the matrix of second
derivatives of the energy with respect to orbital variation parameters, must be computed.
If one or more eigenvalues of the electronic Hessian are negative, the SCF solution is not a minimum.
In that case, orbital parameters can be varied along the lowest Hessian eigenvector to lower the energy.

Orbital variation parameters are usually constrained. For example, in RHF the spatial parts of the \(\alpha\) and \(\beta\) orbitals are the same. In UHF, the orbital coefficients are usually constrained to be real. A stability analysis can check whether a lower SCF solution exists while respecting the constraints of the original solution; this is an internal instability. If one or more constraints have to be relaxed to reach a lower-energy solution, there is an external instability. In PSI4, the only external instability that can be checked at present is the RHF \(\rightarrow\) UHF one.

Currently, two algorithms exist in PSI4 for stability analysis: the original
Direct Inversion and the newly implemented Davidson algorithms. We will first describe
options common to both algorithms. To request a stability analysis at the end of the SCF,
set the keyword STABILITY_ANALYSIS. Value `CHECK`

only computes the electronic
Hessian eigenvalue and checks if an actual SCF minimum has been found, while value `FOLLOW`

rotates the converged orbitals along the lowest eigenvector, then invokes the SCF
procedure again to lower the energy. In case the minimization does not succeed
or ends up on the same unstable solution, you can tune the scale factor for the orbital
rotation through the keyword FOLLOW_STEP_SCALE.
The rotation angle is \(\frac{\pi}{2}\mbox{ } \cdot\) (FOLLOW_STEP_SCALE). The default value of
0.5 usually provides a good guess, and modification is only recommended in difficult cases.
The default behavior for the stability code is to stop after trying to reoptimize the orbitals once
if the instability still exists. For more attempts, set MAX_ATTEMPTS;
the default value of 1 is recommended. In case the SCF ends up in the same minimum, modification
of FOLLOW_STEP_SCALE is recommended over increasing MAX_ATTEMPTS.

Note

Setting the option STABILITY_ANALYSIS to `FOLLOW`

is only avalible for UHF. When using
RHF and ROHF instabilities can be checked, but not followed. If you want to attempt to find a lower energy solution
you should re-run the calculation with REFERENCE set to `UHF`

.

The main algorithm available in PSI4 is the Direct Inversion algorithm. It can *only*
work with SCF_TYPE `PK`

, and it explicitly builds the full electronic Hessian
matrix before explicitly inverting it. As such, this algorithm is very slow and it should
be avoided whenever possible. Direct Inversion is automatically invoked if the newer algorithm
is not available.

The Davidson algorithm for stability analysis was implemented recently. Only the lowest eigenvalues of the electronic Hessian are computed, and Hessian-vector products are computed instead of the full Hessian. This algorithm is thus much more efficient than the Direct Inversion, but at present, it is only available for UHF \(\rightarrow\) UHF stability analysis. The capabilities of both algorithms are summarized below:

Algorithm | REFERENCE | Stability checked | STABILITY_ANALYSIS | SCF_TYPE |
---|---|---|---|---|

Direct Inversion | RHF | Internal, External (\(\rightarrow\) UHF) | `CHECK` |
PK only |

ROHF | Internal | `CHECK` |
PK only | |

Davidson | UHF | Internal | `CHECK` or `FOLLOW` |
Anything |

The best algorithm is automatically selected, *i.e.* Davidson for UHF \(\rightarrow\) UHF and Direct Inversion otherwise.

In addition to the options available for Direct Inversion, the Davidson algorithm can automatically adapt FOLLOW_STEP_SCALE to find a new SCF minimum. If MAX_ATTEMPTS > 1, additional attempts will automatically increment FOLLOW_STEP_SCALE by 0.2 every time the SCF falls back to the previously found unstable minimum. The increment can be adjusted by setting FOLLOW_STEP_INCREMENT. The default value is 0.2; adjust if needed to try different values of FOLLOW_STEP_SCALE in a single computation.

The Davidson solver for the eigenvalues is controlled through several keywords. In the following we only report the most pertinent for stability analysis, see documentation for the CPHF module for a complete list. Some default values were modified for the stability analysis code, in that case they are explicitly indicated here.

SOLVER_MAXITER: maximum number of iterations

SOLVER_CONVERGENCE: eigenvector convergence threshold

SOLVER_N_ROOT: Solve for N eigenvectors in each irreducible representation

SOLVER_N_GUESS: Use N guess vectors, this needs to be larger than the number of roots so that the lowest ones can be captured reliably. Default within this context: 3

SOLVER_MIN_SUBSPACE: Minimum size of the subspace when collapsing.

SOLVER_MAX_SUBSPACE: Maximum size of the subspace. Default within this context: 12

In case convergence problems are encountered during the Davidson procedure, it is recommended to first increase SOLVER_MAX_SUBSPACE, especially if you solve for a large number of roots. This will result in a higher computational cost of each iteration, but should make the solver better behaved. However, note that SOLVER_MAX_SUBSPACE should never be larger than the full subspace minus the number of desired roots to avoid adding artificial zero eigenvalues. This may happen in minimal basis sets, especially with symmetry, but the code automatically adjusts SOLVER_MAX_SUBSPACE if it is too large. If the solver seems to converge on the wrong eigenvalue, try increasing SOLVER_N_GUESS. Otherwise, if the solver is almost converged but reaches the maximum number of iterations, try increasing SOLVER_MAXITER.

## Effective core potentials (ECPs)¶

PSI4 supports the use of effective core potentials to describe the
innermost electrons in heavy elements. If a basis set is designed to use an
effective core potential, the ECP definition should be simply placed alongside
the orbital basis set definition, *c.f.* Inputting effective core potentials (ECPs). All
information related to the definition and number of core electrons will
automatically be detected and no further input is required to use the
ECP-containing basis set. See scf-ecp and dfmp2-ecp
for examples of computations with ECP-containing basis sets.

Warning

Analytic derivatives of ECPs are not yet available. The HF and DFT derivatives are implemented in a semi-numerical scheme, where numerical ECP gradients are added to analytic SCF gradients. Analytic gradients for (DF)MP2 are not yet available, but the standard numerical gradients will work correctly. Fully analytic gradients will be implemented soon.

Warning

ECPs have not been tested with projected basis set guesses or with FI-SAPT calculations. If you require this functionality, please contact the developers on GitHub and/or the forum.

## External potentials and QM/MM¶

In addition to the implementation of EFP for accurate QM/MM computations, PSI4 can perform more rudimentary QM/MM procedures via the EXTERN keyword. The following snippet, extracted from the extern1 test case, demonstrates its use for a TIP3P external potential:

1 2 3 4 5 | ```
Chrgfield = QMMM()
Chrgfield.extern.addCharge(-0.834, 1.649232019048, 0.0, -2.356023604706)
Chrgfield.extern.addCharge( 0.417, 0.544757019107, 0.0, -3.799961446760)
Chrgfield.extern.addCharge( 0.417, 0.544757019107, 0.0, -0.912085762652)
psi4.set_global_option_python('EXTERN', Chrgfield.extern)
``` |

First a QMMM object is created, then three separate particles are added to this
object before the SCF code is told about its existence on the last line. The
calls to `addCharge`

take the atomic charge, x coordinate, y coordinate, and
z coordinate in that order. The atomic charge is specified in atomic units,
and the coordinates always use the same units as the geometry specification in
the regular QM region. Additional MM molecules may be specified by adding
extra calls to `addCharge`

to describe the full MM region.

To run a computation in a constant dipole field, the PERTURB_H, PERTURB_WITH and PERTURB_DIPOLE keywords can be used. As an example, to add a dipole field of magnitude 0.05 a.u. in the y direction and 0.1 a.u. in the z direction, we can use the following keywords:

1 2 3 | ```
set perturb_h true
set perturb_with dipole
set perturb_dipole [ 0, 0.05, 0.1 ]
``` |

Note that if any specified fields do not fall along a symmetry axis, the symmetry of the calculation should be reduced accordingly; if in doubt run the calculation in C1 symmetry. For examples of SCF and MP2 calculations in an external field, see scf7 and dfmp2-grad5.

## Convergence and Algorithm Defaults¶

Ab Initio Method |
Calculation Type | E_CONVERGENCE | D_CONVERGENCE | SCF_TYPE |
---|---|---|---|---|

SCF of HF or DFT | energy | 6 | 6 | DF |

optimization | 8 | 8 | ||

frequency [7] | 8 | 8 | ||

SCF of post-HF | energy | 8 | 8 | PK [3] |

optimization | 10 | 10 | ||

frequency [7] | 10 | 10 | ||

CC property [2] | 10 | 10 |

Ab Initio Method |
Calculation Type | E_CONVERGENCE [5] | R_CONVERGENCE [6] |
---|---|---|---|

post-HF of post-HF | energy | 6 | |

optimization | 8 | ||

frequency [7] | 8 | ||

CC property [2] | 8 |

Footnotes

[1] | Note that this table applies only the SCF module, not to the final convergence criteria for post-HF methods or to methods that use an alternate starting point, like MCSCF. SAPT computations, too, set tighter values. |

[2] | (1, 2) This applies to properties computed through the `property()` function. |

[3] | Post-HF methods that do not rely upon the usual 4-index AO integrals use a density-fitted SCF reference. That is, for DF-MP2 and SAPT, the default SCF_TYPE is DF. |

[4] | Note that this table applies to the final convergence criteria for all the post-SCF modules that define a E_CONVERGENCE keyword. |

[5] | The E_CONVERGENCE keyword is implemented for most post-SCF modules. See a list beginning at E_CONVERGENCE. |

[6] | The R_CONVERGENCE keyword places a convergence check on an internal residual error measure and is implemented for several post-SCF modules (see list beginning at R_CONVERGENCE). It is defined according to the quantum chemical method and so its default value is set by each module individually. |

[7] | (1, 2, 3) For frequency computations by finite difference of energies,
convergence criteria are tightened further still to 10 for
E_CONVERGENCE and D_CONVERGENCE for SCF of HF or DFT, 11
for E_CONVERGENCE and D_CONVERGENCE for SCF of post-HF,
and 10 for E_CONVERGENCE for post-HF of post-HF. |

## Recommendations¶

The SCF code is quite flexible and powerful. We have tried as much as possible to keep the number of options to a minimum and to allow all options to be used in the presence of all other options. Below are some rough words of advice about using the SCF code for practical calculations:

- For GUESS, the
`SAD`

guess is usually your friend, even for open-shell systems (at the very least, it gets the right number of electrons, unlike some other programs). For instance, we have found that a simple SAD guess is often as good as doing a full SCF in a 3-21G basis and then performing a cast-up, at a fraction of the cost. However, SAD and DOCC/SOCC arrays do not play very well together at the moment. - For wall time,
`DF`

may be a factor of ten or more faster than the exact integral technologies available in PSI4. Use`DF`

unless you need absolute accuracy or do not have a -JKFIT auxiliary set for your orbital basis/atom type. Then use`DIRECT`

. - Don’t mess with the DIIS convergence options unless convergence is a problem. We have optimized the parameters for efficiency over a wide array of system types.
- Buy a developer a beer!

The “best-practice” input file for HF is:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 | ```
memory 1 GB # As much as you've got, the DF algorithm can use
molecule {
O
H 1 1.0
H 1 1.0 2 104.5
}
set {
basis cc-pvdz
scf_type df
guess sad
ints_tolerance 1.0E-10 # Even this is epically tight, 1.0E-8 is OK
}
energy('scf')
``` |